A10A – BMW DTC

BMW DTC A10A – Active Crash Safety Module (ACSM): Battery Safety Terminal (BST)

DTC A10A meaning on BMW

The DTC A10A refers to a fault code related to the Active Crash Safety Module (ACSM) in BMW vehicles. This code specifically indicates an issue with the Battery Safety Terminal (BST). The BST is a critical component that helps manage the vehicle’s electrical system during a crash, ensuring that power is safely disconnected to prevent further hazards.

BMW DTC A10A symptoms

When the DTC A10A is triggered, drivers may experience several symptoms, including:

• Illumination of the airbag warning light on the dashboard
• Malfunction of the airbag system
• Inability to deploy airbags in the event of a collision
• Possible issues with other safety features

BMW DTC A10A causes

The causes of the DTC A10A can vary, but common reasons include:

• Faulty Battery Safety Terminal (BST)
• Wiring issues or short circuits in the electrical system
• Corrosion or damage to connectors related to the BST
• Software glitches in the ACSM

BMW DTC A10A seriousness

The seriousness of the DTC A10A should not be underestimated. Since it relates to the airbag system and crash safety features, it can pose significant risks, including:

• Increased risk of injury in the event of an accident
• Failure of airbags to deploy when needed
• Potential legal implications if the vehicle is involved in a crash

How to diagnose DTC A10A on BMW

To diagnose the DTC A10A, follow these steps:

1. Use an OBD-II scanner to read the fault codes from the vehicle’s computer.
2. Inspect the Battery Safety Terminal (BST) for any visible damage or corrosion.
3. Check the wiring and connectors associated with the BST for shorts or breaks.
4. Verify the functionality of the ACSM by running a diagnostic test.
5. Clear the fault codes and see if the DTC A10A reappears after a test drive.

How to fix DTC A10A on BMW step-by-step instructions

To fix the DTC A10A, follow these step-by-step instructions:

1. Disconnect the vehicle’s battery to ensure safety while working on the electrical system.
2. Inspect and clean the Battery Safety Terminal (BST) and its connectors.
3. If the BST is faulty, replace it with a new one.
4. Check and repair any damaged wiring or connectors related to the BST.
5. Reconnect the battery and perform a diagnostic scan to ensure the DTC A10A is cleared.
6. Test drive the vehicle to confirm that the issue is resolved and the airbag system is functioning properly.

How to erase DTC A10A on BMW

To erase the DTC A10A, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Access the diagnostic menu and select the option to read fault codes.
3. Locate the DTC A10A in the list of codes.
4. Select the option to clear or erase the fault codes.
5. Disconnect the scanner and turn off the ignition.
6. Start the vehicle and check if the DTC A10A reappears after a test drive.

Recommended tools & DTC Scanners for BMW

Best Diagnostic App for modern BMWs: BimmerLink

Recommended Bluetooth adapter for Bimmerlink: OBDLink CX

Cable adapter for Bimmerlink: Enet Cable USB Type C

For older BMWs we recommend: Autel AutoLink AL319 (2024 version)

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.