P1150 – Audi DTC

Audi DTC P1150 – O2 Control (Bank 2) Out of range

DTC P1150 meaning on Audi

The Diagnostic Trouble Code (DTC) P1150 for Audi indicates that the oxygen sensor control for Bank 2 is out of range. This means that the oxygen sensor located in the exhaust system after the catalytic converter on Bank 2 is not functioning within the expected parameters. The oxygen sensor is responsible for monitoring the oxygen levels in the exhaust gases and providing feedback to the engine control module for proper air-fuel ratio adjustments.

Audi DTC P1150 symptoms

Symptoms of DTC P1150 on an Audi may include:

• Check Engine Light (CEL) illuminated on the dashboard
• Decreased fuel efficiency
• Engine running rough or misfiring
• Reduced engine performance

Audi DTC P1150 causes

Common causes of DTC P1150 on an Audi include:

• Failed oxygen sensor on Bank 2
• Wiring or connector issues related to the oxygen sensor
• Exhaust system leaks
• Issues with the catalytic converter

Audi DTC P1150 seriousness

While DTC P1150 may not cause immediate drivability issues, it is important to address this fault code promptly. Ignoring the problem can lead to decreased fuel efficiency, increased emissions, and potential damage to the catalytic converter over time.

How to diagnose DTC P1150 on Audi

To diagnose DTC P1150 on an Audi, a mechanic may perform the following steps:

1. Use a diagnostic scanner to retrieve the fault code and related data
2. Inspect the oxygen sensor on Bank 2 for any visible damage or contamination
3. Check the wiring and connectors for the oxygen sensor for any issues
4. Perform a visual inspection of the exhaust system for leaks or damage

How to fix DTC P1150 on Audi

To fix DTC P1150 on an Audi, the following steps may be taken:

1. Replace the oxygen sensor on Bank 2 if it is faulty
2. Repair or replace any damaged wiring or connectors related to the oxygen sensor
3. Address any exhaust system leaks or issues with the catalytic converter
4. Clear the fault code using a diagnostic scanner after the repairs have been completed

How to erase DTC P1150 on Audi

To erase DTC P1150 on an Audi, follow these steps:

1. Connect a diagnostic scanner to the vehicle’s OBD-II port
2. Access the scanner’s menu to clear the fault codes
3. Follow the on-screen prompts to erase the DTC P1150 code
4. Once the code has been cleared, start the vehicle to ensure the Check Engine Light is no longer illuminated

Recommended tools for Audi diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.