P1116 – Audi DTC

Audi DTC P1116 – O2 Sensor Heater Circuit, Bank1-Sensor1 Open

DTC P1116 meaning on Audi

The Diagnostic Trouble Code (DTC) P1116 for Audi indicates an issue with the O2 sensor heater circuit in Bank 1, Sensor 1. This means that the heating element in the oxygen sensor located in the exhaust system before the catalytic converter on the first bank of cylinders is not functioning properly. The O2 sensor heater is crucial for accurate and efficient operation of the sensor.

Audi DTC P1116 symptoms

Symptoms of DTC P1116 on an Audi may include:

• Check Engine Light (MIL) illuminated on the dashboard
• Poor fuel economy
• Engine running rough or misfiring
• Reduced engine performance

Audi DTC P1116 causes

Common causes of DTC P1116 on an Audi include:

• Failed O2 sensor heater element
• Wiring or connector issues in the O2 sensor heater circuit
• Blown fuse related to the O2 sensor heater

Audi DTC P1116 seriousness

While DTC P1116 may not cause immediate drivability issues, it is important to address this problem promptly. Ignoring this fault can lead to decreased fuel efficiency, increased emissions, and potential damage to the catalytic converter over time.

How to diagnose DTC P1116 on Audi

To diagnose DTC P1116 on an Audi, a mechanic would typically perform the following steps:

1. Use a diagnostic scanner to retrieve the fault codes and confirm the presence of P1116.
2. Inspect the wiring and connectors related to the O2 sensor heater circuit for any damage or corrosion.
3. Check the O2 sensor heater element for continuity and proper resistance.
4. Test the fuse associated with the O2 sensor heater for continuity.

How to fix DTC P1116 on Audi

To fix DTC P1116 on an Audi, the following steps may be taken:

1. Replace the faulty O2 sensor with a new one that includes a properly functioning heater element.
2. Repair or replace any damaged wiring or connectors in the O2 sensor heater circuit.
3. If a blown fuse is found, replace it with the correct amperage fuse.

How to erase DTC P1116 on Audi

After addressing the underlying issue causing DTC P1116 on an Audi, the fault code can be cleared using a diagnostic scanner. This will reset the Check Engine Light and allow the vehicle’s onboard computer to monitor the system for any new faults.

Recommended tools for Audi diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.