P1107 – Audi DTC

Audi DTC P1107 – O2 Sensor Heating Circuit, Bank2-Sensor1 Short to B+

DTC P1107 meaning on Audi

The Diagnostic Trouble Code (DTC) P1107 for Audi indicates a fault in the O2 sensor heating circuit for Bank 2, Sensor 1. This fault specifically points to a short circuit to battery positive (B+), meaning there is an unintended connection between the O2 sensor’s heating circuit and the positive battery terminal.

Audi DTC P1107 symptoms

Symptoms of DTC P1107 on an Audi may include:

• Check Engine Light (CEL) illuminated on the dashboard
• Decreased fuel efficiency
• Engine running rough or misfiring
• Potential increase in emissions

Audi DTC P1107 causes

The causes of DTC P1107 on an Audi can include:

• Short circuit in the O2 sensor heating circuit
• Wiring harness issues
• Faulty O2 sensor
• Corrosion or poor connections in the circuit

Audi DTC P1107 seriousness

While DTC P1107 may not cause immediate drivability issues, it is important to address this fault promptly. Ignoring this fault can lead to decreased fuel efficiency, potential engine damage, and increased emissions, which can affect the vehicle’s overall performance and environmental impact.

How to diagnose DTC P1107 on Audi

To diagnose DTC P1107 on an Audi, you can follow these steps:

1. Use an OBD-II scanner to retrieve the fault code and confirm DTC P1107.
2. Inspect the wiring harness connected to Bank 2, Sensor 1 O2 sensor for any visible damage or corrosion.
3. Check the O2 sensor heating circuit for continuity and resistance using a multimeter.
4. If necessary, perform a visual inspection of the O2 sensor itself for any signs of damage or malfunction.

How to fix DTC P1107 on Audi

To fix DTC P1107 on an Audi, you can try the following solutions:

1. Repair any damaged wiring or connections in the O2 sensor heating circuit.
2. Replace the faulty O2 sensor if it is determined to be the cause of the short circuit.
3. Clean any corrosion from the connectors and ensure a secure connection.
4. Clear the fault code using an OBD-II scanner after the repair is completed.

How to erase DTC P1107 on Audi

To erase DTC P1107 on an Audi, follow these steps:

1. Ensure the fault has been diagnosed and repaired correctly.
2. Use an OBD-II scanner to access the vehicle’s onboard computer system.
3. Select the option to clear the fault codes stored in the system.
4. Confirm the deletion of the DTC P1107 code and check for any remaining codes.

Recommended tools for Audi diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.