P0C00 – Audi DTC

Audi DTC P0C00 – Drive motor generator power inverter control module failure

DTC P0C00 meaning on Audi

DTC P0C00 indicates a failure in the drive motor generator power inverter control module. This code is specific to hybrid and electric vehicles, where the inverter is responsible for converting DC power from the battery to AC power for the electric motor. A malfunction in this module can lead to performance issues and affect the vehicle’s ability to operate efficiently.

Audi DTC P0C00 symptoms

Common symptoms associated with DTC P0C00 may include:

• Warning lights on the dashboard, particularly the check engine light
• Reduced power or acceleration
• Unusual noises from the inverter or electric motor
• Increased energy consumption
• Vehicle may enter limp mode

Audi DTC P0C00 causes

Several factors can lead to the P0C00 code being triggered, including:

• Faulty drive motor generator power inverter control module
• Wiring issues or poor connections in the inverter circuit
• Overheating of the inverter due to inadequate cooling
• Software glitches or outdated firmware
• Battery issues affecting the inverter’s performance

Audi DTC P0C00 seriousness

The seriousness of DTC P0C00 should not be underestimated. If left unaddressed, it can lead to:

• Complete loss of propulsion
• Increased risk of further electrical system damage
• Potential safety hazards while driving
• Higher repair costs due to extensive damage

How to diagnose DTC P0C00 on Audi

To diagnose DTC P0C00, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the P0C00 code.
2. Inspect the drive motor generator power inverter control module for visible damage.
3. Check all wiring and connectors for signs of wear, corrosion, or loose connections.
4. Test the inverter’s functionality using a multimeter to check voltage and resistance.
5. Review the vehicle’s service history for any previous related issues.
6. Update the vehicle’s software if necessary.

How to fix DTC P0C00 on Audi step-by-step instructions

To fix DTC P0C00, follow these steps:

1. Disconnect the vehicle’s battery to ensure safety.
2. Inspect and repair any damaged wiring or connectors related to the inverter.
3. Replace the drive motor generator power inverter control module if it is faulty.
4. Ensure proper cooling for the inverter by checking the cooling system.
5. Reconnect the battery and clear the DTC using an OBD-II scanner.
6. Test drive the vehicle to ensure the issue is resolved and no codes reappear.

How to erase DTC P0C00 on Audi

To erase DTC P0C00, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Access the diagnostic menu and locate the option to clear or erase codes.
3. Select the P0C00 code and confirm the deletion.
4. Disconnect the scanner and turn off the vehicle.
5. Restart the vehicle and monitor for any reoccurrence of the code.

Recommended tools for Audi diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.