P0B24 – Audi DTC

Audi DTC P0B24 – Battery Energy Control Module (BECM) failure, High voltage battery assembly failure, Wiring issue

DTC P0B24 meaning on Audi

DTC P0B24 refers to a fault code indicating a failure in the Battery Energy Control Module (BECM) or issues related to the high voltage battery assembly in Audi vehicles. This code is part of the diagnostic trouble codes that help identify problems within the hybrid or electric vehicle systems. The BECM is responsible for managing the energy flow between the high voltage battery and the vehicle’s electrical systems.

Audi DTC P0B24 symptoms

Symptoms associated with DTC P0B24 may include:

• Warning lights on the dashboard, particularly the battery or check engine light.
• Reduced power or performance of the vehicle.
• Increased charging times or issues with charging the battery.
• Unusual noises from the battery compartment.
• Inconsistent or erratic behavior of electrical components.

Audi DTC P0B24 causes

Common causes of DTC P0B24 include:

• Failure of the Battery Energy Control Module (BECM).
• High voltage battery assembly failure, which may involve cell degradation or internal short circuits.
• Wiring issues, such as damaged or corroded connections between the BECM and the battery.
• Software glitches or outdated firmware in the BECM.
• Environmental factors, such as extreme temperatures affecting battery performance.

Audi DTC P0B24 seriousness

The seriousness of DTC P0B24 can vary, but it is generally considered a significant issue. If not addressed, it can lead to:

• Complete loss of vehicle power.
• Potential safety hazards due to battery failure.
• Increased repair costs if the problem escalates.
• Decreased vehicle efficiency and performance.

How to diagnose DTC P0B24 on Audi

To diagnose DTC P0B24, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC P0B24.
2. Inspect the high voltage battery assembly for visible damage or corrosion.
3. Check the wiring and connectors between the BECM and the battery for any signs of wear or damage.
4. Test the BECM for proper functionality using manufacturer-specific diagnostic tools.
5. Review any software updates or recalls related to the BECM.

How to fix DTC P0B24 on Audi step-by-step instructions

To fix DTC P0B24, follow these step-by-step instructions:

1. Ensure the vehicle is safely powered down and the high voltage system is deactivated.
2. Inspect and repair any damaged wiring or connectors found during diagnosis.
3. If the BECM is faulty, replace it with a new or refurbished unit.
4. Replace the high voltage battery assembly if it is determined to be defective.
5. Reprogram the BECM if necessary, following manufacturer guidelines.
6. Clear the DTC using an OBD-II scanner and perform a test drive to ensure the issue is resolved.

How to erase DTC P0B24 on Audi

To erase DTC P0B24, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Access the diagnostic menu and locate the option to clear or erase trouble codes.
3. Select DTC P0B24 and confirm the action to erase the code.
4. Disconnect the scanner and start the vehicle to check if the code reappears.

Recommended tools for Audi diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.