Audi DTC P0935 – Hydraulic power unit assembly failure, Transmission Control Module (TCM) failure, Wiring issue
DTC P0935 meaning on Audi
DTC P0935 refers to a fault code indicating a failure in the hydraulic power unit assembly of the transmission system. This code is specific to the Transmission Control Module (TCM) and suggests that there is an issue with the hydraulic pressure control, which is crucial for the proper functioning of the transmission. The hydraulic power unit is responsible for managing the hydraulic pressure needed for gear shifts and overall transmission operation.
Audi DTC P0935 symptoms
Common symptoms associated with DTC P0935 may include:
- Transmission slipping or harsh shifting
- Delayed engagement when shifting gears
- Warning lights on the dashboard, particularly the check engine light
- Unusual noises from the transmission
- Loss of power during acceleration
Audi DTC P0935 causes
The causes of DTC P0935 can include:
- Failure of the hydraulic power unit assembly
- Malfunction of the Transmission Control Module (TCM)
- Wiring issues, such as damaged or corroded connectors
- Low transmission fluid levels or contamination
- Faulty sensors related to hydraulic pressure
Audi DTC P0935 seriousness
DTC P0935 is considered a serious issue as it directly affects the transmission’s performance. If not addressed, it can lead to:
- Increased wear and tear on transmission components
- Complete transmission failure
- Unsafe driving conditions due to unpredictable shifting
- Higher repair costs if the problem escalates
How to diagnose DTC P0935 on Audi
To diagnose DTC P0935, follow these steps:
- Use an OBD-II scanner to confirm the presence of DTC P0935.
- Inspect the transmission fluid level and condition.
- Check for any additional DTCs that may provide more context.
- Examine the wiring and connectors related to the hydraulic power unit and TCM for damage or corrosion.
- Test the hydraulic power unit assembly for proper operation.
- Evaluate the TCM for any faults or failures.
How to fix DTC P0935 on Audi step-by-step instructions
To fix DTC P0935, follow these steps:
- Address any wiring issues by repairing or replacing damaged connectors.
- Replace the hydraulic power unit assembly if it is found to be faulty.
- Reprogram or replace the Transmission Control Module (TCM) if necessary.
- Ensure the transmission fluid is at the correct level and is clean replace if contaminated.
- Clear the DTC using an OBD-II scanner and test drive the vehicle to ensure the issue is resolved.
Recommended tools for Audi diagnostics
Explore our expert picks: The Best OBD2 Scanners for 2025
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.