P0846 – Audi DTC

Audi DTC P0846 – Transmission Control Module (TCM) failure, Transmission fluid level is low, Transmission fluid pressure sensor failure, Wiring issue

DTC P0846 meaning on Audi

DTC P0846 refers to a problem with the Transmission Fluid Pressure Sensor/Switch ‘B’ Circuit Range/Performance. This code indicates that the Transmission Control Module (TCM) has detected an issue with the transmission fluid pressure sensor, which is responsible for monitoring the fluid pressure within the transmission system. A malfunction in this sensor can lead to improper transmission operation, affecting shifting and overall performance.

Audi DTC P0846 symptoms

Common symptoms associated with DTC P0846 may include:

• Delayed or harsh shifting
• Transmission slipping
• Warning lights on the dashboard, such as the check engine light
• Reduced acceleration or power
• Unusual noises from the transmission

Audi DTC P0846 causes

Several factors can lead to the occurrence of DTC P0846, including:

• Transmission fluid level is low
• Transmission fluid pressure sensor failure
• Wiring issues, such as damaged or corroded connectors
• Faulty Transmission Control Module (TCM)
• Contaminated or degraded transmission fluid

Audi DTC P0846 seriousness

DTC P0846 is considered a serious issue as it can lead to significant transmission problems if not addressed. Potential consequences include:

• Increased wear and tear on transmission components
• Complete transmission failure
• Unsafe driving conditions due to loss of power or control

How to diagnose DTC P0846 on Audi

To diagnose DTC P0846, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC P0846.
2. Check the transmission fluid level and condition.
3. Inspect the wiring and connectors related to the transmission fluid pressure sensor.
4. Test the transmission fluid pressure sensor for proper operation.
5. Examine the Transmission Control Module (TCM) for faults.

How to fix DTC P0846 on Audi step-by-step instructions

To fix DTC P0846, follow these steps:

1. Check and top off the transmission fluid if it is low.
2. Inspect and repair any damaged wiring or connectors.
3. Replace the transmission fluid pressure sensor if it is faulty.
4. Clear the DTC using an OBD-II scanner.
5. Test drive the vehicle to ensure the issue is resolved and no new codes appear.

How to erase DTC P0846 on Audi

To erase DTC P0846, perform the following:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Access the diagnostic menu and select the option to clear or erase trouble codes.
3. Confirm the action and wait for the scanner to complete the process.
4. Disconnect the scanner and start the vehicle to check if the code reappears.

Recommended tools for Audi diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.