Audi DTC P0845 – Transmission Control Module (TCM) failure, Transmission fluid level is low, Transmission fluid pressure sensor failure, Wiring issue
DTC P0845 meaning on Audi
DTC P0845 refers to a problem with the Transmission Fluid Pressure Sensor/Switch ‘B’ circuit in Audi vehicles. This code indicates that the Transmission Control Module (TCM) has detected an issue with the transmission fluid pressure sensor, which is crucial for monitoring the hydraulic pressure within the transmission. The TCM uses this information to optimize shifting and ensure proper transmission operation.
Audi DTC P0845 symptoms
Common symptoms associated with DTC P0845 may include:
- Transmission slipping or harsh shifting
- Delayed engagement when shifting from park to drive or reverse
- Check Engine Light illuminated
- Unusual noises from the transmission
- Reduced fuel efficiency
Audi DTC P0845 causes
Several factors can lead to the occurrence of DTC P0845, including:
- Transmission fluid level is low
- Transmission fluid pressure sensor failure
- Wiring issues, such as damaged or corroded connectors
- Faulty Transmission Control Module (TCM)
- Contaminated or degraded transmission fluid
Audi DTC P0845 seriousness
DTC P0845 is considered a serious issue as it can lead to:
- Increased wear and tear on transmission components
- Potential transmission failure if not addressed
- Unsafe driving conditions due to unpredictable shifting
- Higher repair costs if the problem escalates
How to diagnose DTC P0845 on Audi
To diagnose DTC P0845, follow these steps:
- Use an OBD-II scanner to confirm the DTC and check for any related codes.
- Inspect the transmission fluid level and condition.
- Examine the wiring and connectors related to the transmission fluid pressure sensor.
- Test the transmission fluid pressure sensor for proper operation.
- Check the TCM for any faults or updates.
How to fix DTC P0845 on Audi step-by-step instructions
To fix DTC P0845, follow these step-by-step instructions:
- Check and top off the transmission fluid if it is low.
- Inspect the transmission fluid for contamination and replace it if necessary.
- Examine the wiring and connectors for damage or corrosion, and repair or replace as needed.
- Test the transmission fluid pressure sensor and replace it if it is faulty.
- Clear the DTC using an OBD-II scanner and take the vehicle for a test drive to ensure the issue is resolved.
How to erase DTC P0845 on Audi
To erase DTC P0845, follow these steps:
- Connect an OBD-II scanner to the vehicle’s diagnostic port.
- Turn on the ignition without starting the engine.
- Navigate to the ‘Erase Codes’ or ‘Clear DTCs’ option on the scanner.
- Confirm the action to clear the codes.
- Disconnect the scanner and start the vehicle to check if the code returns.
Recommended tools for Audi diagnostics
Explore our expert picks: The Best OBD2 Scanners for 2025
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.