Audi DTC P0842 – Transmission Control Module (TCM) failure, Transmission fluid level is low, Transmission fluid pressure sensor failure, Wiring issue
DTC P0842 meaning on Audi
DTC P0842 refers to a problem with the transmission fluid pressure sensor circuit in Audi vehicles. This code indicates that the Transmission Control Module (TCM) has detected an abnormal voltage or signal from the transmission fluid pressure sensor. The sensor is crucial for monitoring the fluid pressure within the transmission, which is essential for proper shifting and overall transmission performance.
Audi DTC P0842 symptoms
Common symptoms associated with DTC P0842 may include:
- Transmission slipping or harsh shifting
- Delayed engagement when shifting gears
- Check Engine Light illuminated
- Unusual noises from the transmission
- Reduced fuel efficiency
Audi DTC P0842 causes
Several factors can lead to the occurrence of DTC P0842, including:
- Transmission fluid level is low
- Transmission fluid pressure sensor failure
- Wiring issues, such as damaged or corroded connectors
- Faulty Transmission Control Module (TCM)
- Contaminated or degraded transmission fluid
Audi DTC P0842 seriousness
DTC P0842 can be serious as it may lead to:
- Increased wear and tear on transmission components
- Potential transmission failure if not addressed
- Unsafe driving conditions due to erratic shifting
How to diagnose DTC P0842 on Audi
To diagnose DTC P0842, follow these steps:
- Use an OBD-II scanner to confirm the DTC and check for any additional codes.
- Inspect the transmission fluid level and condition.
- Examine the wiring and connectors related to the transmission fluid pressure sensor.
- Test the transmission fluid pressure sensor for proper operation.
- Check the TCM for any faults or updates.
How to fix DTC P0842 on Audi step-by-step instructions
To fix DTC P0842, follow these steps:
- Check and top off the transmission fluid if it is low.
- Inspect and repair any damaged wiring or connectors.
- Replace the transmission fluid pressure sensor if it is faulty.
- Clear the DTC using an OBD-II scanner.
- Test drive the vehicle to ensure the issue is resolved and the code does not return.
How to erase DTC P0842 on Audi
To erase DTC P0842, perform the following:
- Connect an OBD-II scanner to the vehicle’s diagnostic port.
- Access the trouble codes menu and select the option to clear or erase codes.
- Confirm the action and wait for the scanner to complete the process.
- Disconnect the scanner and start the vehicle to check if the code reappears.
Recommended tools for Audi diagnostics
Explore our expert picks: The Best OBD2 Scanners for 2025
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.