P0841 – Audi DTC

Audi DTC P0841 – Transmission Control Module (TCM) failure, Transmission fluid level is low, Transmission fluid pressure sensor failure, Wiring issue

DTC P0841 meaning on Audi

DTC P0841 refers to a problem with the transmission fluid pressure sensor circuit in Audi vehicles. This code indicates that the Transmission Control Module (TCM) has detected an abnormal voltage or signal from the transmission fluid pressure sensor. The sensor is crucial for monitoring the fluid pressure within the transmission, which is essential for proper shifting and overall transmission performance.

Audi DTC P0841 symptoms

Common symptoms associated with DTC P0841 may include:

• Transmission slipping or harsh shifting
• Delayed engagement when shifting gears
• Warning lights on the dashboard, such as the check engine light
• Reduced fuel efficiency
• Unusual noises from the transmission

Audi DTC P0841 causes

Several factors can lead to the occurrence of DTC P0841, including:

• Transmission fluid level is low
• Transmission fluid pressure sensor failure
• Wiring issues, such as damaged or corroded connectors
• Faulty Transmission Control Module (TCM)
• Contaminated or degraded transmission fluid

Audi DTC P0841 seriousness

DTC P0841 is considered a serious issue as it can lead to significant transmission problems if not addressed. Potential consequences include:

• Increased wear and tear on transmission components
• Complete transmission failure
• Unsafe driving conditions due to unpredictable shifting
• Higher repair costs if the issue is not resolved promptly

How to diagnose DTC P0841 on Audi

To diagnose DTC P0841, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC P0841.
2. Check the transmission fluid level and condition.
3. Inspect the wiring and connectors related to the transmission fluid pressure sensor.
4. Test the transmission fluid pressure sensor for proper operation.
5. Examine the Transmission Control Module (TCM) for faults.

How to fix DTC P0841 on Audi step-by-step instructions

To fix DTC P0841, follow these steps:

1. Check and top off the transmission fluid if it is low.
2. Inspect and repair any damaged wiring or connectors.
3. Replace the transmission fluid pressure sensor if it is faulty.
4. Clear the DTC using an OBD-II scanner.
5. Test drive the vehicle to ensure the issue is resolved and the code does not return.

How to erase DTC P0841 on Audi

To erase DTC P0841, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the codes.
5. Disconnect the scanner and start the vehicle to check for any reoccurring codes.

Recommended tools for Audi diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.