Audi DTC P0730 – Defective Shift Solenoids, Defective Engine Coolant Temperature Sensor, Defective Valve Body, Dirty transmission fluid that restricts the hydraulic passages
DTC P0730 meaning on Audi
DTC P0730 indicates a problem with the transmission system in Audi vehicles. Specifically, it refers to an incorrect gear ratio detected by the transmission control module (TCM). This code suggests that the transmission is not shifting properly, which can lead to poor performance and drivability issues.
Audi DTC P0730 symptoms
Common symptoms associated with DTC P0730 may include:
- Slipping transmission
- Delayed or harsh shifting
- Check Engine Light illuminated
- Unusual noises from the transmission
- Reduced acceleration
Audi DTC P0730 causes
Several factors can contribute to the occurrence of DTC P0730, including:
- Defective shift solenoids
- Defective engine coolant temperature sensor
- Defective valve body
- Dirty transmission fluid that restricts hydraulic passages
Audi DTC P0730 seriousness
DTC P0730 is considered a serious issue as it can lead to significant transmission problems. If left unaddressed, it may result in:
- Complete transmission failure
- Increased repair costs
- Unsafe driving conditions
How to diagnose DTC P0730 on Audi
To diagnose DTC P0730, follow these steps:
- Use an OBD-II scanner to confirm the DTC and check for any additional codes.
- Inspect the transmission fluid for contamination or low levels.
- Test the shift solenoids for proper operation.
- Check the engine coolant temperature sensor for accuracy.
- Examine the valve body for any signs of wear or damage.
How to fix DTC P0730 on Audi step-by-step instructions
To fix DTC P0730, follow these step-by-step instructions:
- Start by checking the transmission fluid level and condition. Replace if dirty or low.
- Test and replace any defective shift solenoids.
- Inspect and replace the engine coolant temperature sensor if faulty.
- Examine the valve body for issues and replace if necessary.
- Clear the DTC using an OBD-II scanner and take the vehicle for a test drive to ensure the issue is resolved.
How to erase DTC P0730 on Audi
To erase DTC P0730, follow these steps:
- Connect an OBD-II scanner to the vehicle’s diagnostic port.
- Turn on the ignition without starting the engine.
- Navigate to the DTC menu on the scanner.
- Select the option to clear or erase the codes.
- Disconnect the scanner and start the vehicle to verify that the code does not reappear.
Recommended tools for Audi diagnostics
Explore our expert picks: The Best OBD2 Scanners for 2025
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.