P0602 – Audi DTC

Audi DTC P0602 – Powertrain Control Module (PCM) failure, Wiring issue

DTC P0602 meaning on Audi

DTC P0602 indicates a malfunction in the Powertrain Control Module (PCM) of an Audi vehicle. This code signifies that the PCM has detected an internal failure, which may affect the vehicle’s performance and emissions. The PCM is responsible for managing various engine and transmission functions, and a failure can lead to improper operation of these systems.

Audi DTC P0602 symptoms

Common symptoms associated with DTC P0602 may include:

• Check Engine Light illuminated
• Reduced engine performance
• Stalling or rough idling
• Difficulty starting the engine
• Increased fuel consumption

Audi DTC P0602 causes

The causes of DTC P0602 can vary, but typical reasons include:

• Internal failure of the Powertrain Control Module
• Corroded or damaged wiring harness
• Faulty connectors or terminals
• Software issues within the PCM
• Electrical shorts or open circuits

Audi DTC P0602 seriousness

DTC P0602 is considered a serious issue as it can lead to significant performance problems. If left unaddressed, it may result in:

• Increased emissions
• Potential engine damage
• Unsafe driving conditions
• Failure to pass emissions tests

How to diagnose DTC P0602 on Audi

To diagnose DTC P0602, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the DTC.
2. Inspect the wiring and connectors related to the PCM for any visible damage.
3. Check for any additional DTCs that may provide more context.
4. Perform a visual inspection of the PCM for signs of damage or corrosion.
5. Test the PCM’s power and ground circuits to ensure proper voltage and continuity.
6. Consider updating the PCM software if applicable.

How to fix DTC P0602 on Audi step-by-step instructions

To fix DTC P0602, follow these steps:

1. Inspect and repair any damaged wiring or connectors related to the PCM.
2. Replace the PCM if it is determined to be faulty.
3. Reprogram or update the PCM software if necessary.
4. Clear the DTC using an OBD-II scanner.
5. Test drive the vehicle to ensure the issue is resolved and the Check Engine Light does not reappear.

How to erase DTC P0602 on Audi

To erase DTC P0602, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the DTC menu on the scanner.
4. Select the option to clear or erase the DTCs.
5. Confirm the action and wait for the scanner to complete the process.
6. Disconnect the scanner and start the vehicle to check if the code returns.

Recommended tools for Audi diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.