Audi DTC P0430 – Defective Catalytic Converter, Internal engine damage resulting in high oil consumption and/or a leaking Head Gasket has damaged the Catalytic Converter
DTC P0430 meaning on Audi
DTC P0430 indicates that the engine control module (ECM) has detected a problem with the catalytic converter’s efficiency on bank 2 of the engine. This code specifically points to a failure in the catalytic converter to convert exhaust gases effectively, which can lead to increased emissions and reduced engine performance.
Audi DTC P0430 symptoms
Common symptoms associated with DTC P0430 may include:
- Check Engine Light (CEL) illuminated
- Decreased engine performance
- Increased fuel consumption
- Rough idling or stalling
- Unusual exhaust odors
Audi DTC P0430 causes
Several factors can lead to the triggering of DTC P0430, including:
- Defective catalytic converter
- Faulty oxygen sensors
- Exhaust leaks before the catalytic converter
- Internal engine damage resulting in high oil consumption
- Leaking head gasket causing coolant contamination
Audi DTC P0430 seriousness
DTC P0430 is considered a serious issue as it can lead to:
- Increased emissions, potentially failing emissions tests
- Damage to the catalytic converter, leading to costly repairs
- Reduced engine performance and efficiency
- Potential engine damage if underlying issues are not addressed
How to diagnose DTC P0430 on Audi
To diagnose DTC P0430, follow these steps:
- Use an OBD-II scanner to confirm the DTC and check for additional codes.
- Inspect the exhaust system for leaks or damage.
- Test the oxygen sensors for proper operation.
- Check the catalytic converter for physical damage or blockage.
- Evaluate engine performance and check for signs of internal damage.
How to fix DTC P0430 on Audi step-by-step instructions
To fix DTC P0430, follow these steps:
- Address any underlying issues such as oil consumption or head gasket leaks.
- Replace faulty oxygen sensors if they are not functioning correctly.
- Repair any exhaust leaks found during inspection.
- Replace the defective catalytic converter if necessary.
- Clear the DTC using an OBD-II scanner and test drive the vehicle to ensure the issue is resolved.
How to erase DTC P0430 on Audi
To erase DTC P0430, follow these steps:
- Connect an OBD-II scanner to the vehicle’s diagnostic port.
- Turn on the ignition without starting the engine.
- Navigate to the DTC menu on the scanner.
- Select the option to clear or erase the codes.
- Disconnect the scanner and start the engine to verify that the code does not reappear.
Recommended tools for Audi diagnostics
Explore our expert picks: The Best OBD2 Scanners for 2025
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.