P0205 – Audi DTC

Audi DTC P0205 – Fuel injector failure, Powertrain Control Module (PCM) failure, Wiring issue

DTC P0205 meaning on Audi

DTC P0205 refers to a specific diagnostic trouble code that indicates a problem with the fuel injector circuit for cylinder 5 in an Audi vehicle. This code is part of the On-Board Diagnostics II (OBD-II) system and is triggered when the Powertrain Control Module (PCM) detects an issue with the fuel injector’s operation or its electrical circuit.

Audi DTC P0205 symptoms

Common symptoms associated with DTC P0205 may include:

• Engine misfire or rough idle
• Decreased engine performance
• Increased fuel consumption
• Check Engine Light (CEL) illuminated
• Difficulty starting the engine

Audi DTC P0205 causes

Several potential causes for DTC P0205 include:

• Fuel injector failure
• Powertrain Control Module (PCM) failure
• Wiring issues, such as damaged or corroded connectors
• Faulty fuel injector driver circuit
• Short or open circuit in the fuel injector wiring

Audi DTC P0205 seriousness

DTC P0205 is considered a serious issue as it can lead to engine performance problems. If left unaddressed, it may result in:

• Increased emissions
• Potential engine damage due to misfiring
• Reduced fuel efficiency
• Failure to pass emissions tests

How to diagnose DTC P0205 on Audi

To diagnose DTC P0205, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC P0205.
2. Inspect the wiring and connectors for cylinder 5’s fuel injector for any visible damage.
3. Check the resistance of the fuel injector using a multimeter to ensure it is within specifications.
4. Test the fuel injector driver circuit from the PCM to the injector.
5. Perform a functional test of the fuel injector to ensure it operates correctly.

How to fix DTC P0205 on Audi step-by-step instructions

To fix DTC P0205, follow these step-by-step instructions:

1. Disconnect the battery to ensure safety while working on the electrical system.
2. Inspect and repair any damaged wiring or connectors related to the fuel injector.
3. If the fuel injector is faulty, replace it with a new one.
4. Check the PCM for any faults if necessary, reprogram or replace it.
5. Reconnect the battery and clear the DTC using an OBD-II scanner.
6. Start the engine and perform a test drive to ensure the issue is resolved.

Recommended tools for Audi diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.