P0201 – Audi DTC

Audi DTC P0201 – Defective Fuel Injector, Faulty or corroded Fuel Injector, wiring, and/or connections, Plugged Fuel Injector, Dirt in the Fuel Injector

DTC P0201 meaning on Audi

DTC P0201 refers to a problem with the fuel injector circuit for cylinder 1 in Audi vehicles. This code indicates that the Engine Control Module (ECM) has detected an issue with the fuel injector’s performance or operation. The fuel injector is responsible for delivering the correct amount of fuel to the engine, and any malfunction can lead to poor engine performance, increased emissions, and potential engine damage.

Audi DTC P0201 symptoms

Common symptoms associated with DTC P0201 may include:

• Engine misfires
• Rough idling
• Decreased fuel efficiency
• Check Engine Light illuminated
• Loss of power during acceleration
• Increased emissions

Audi DTC P0201 causes

Several factors can lead to the triggering of DTC P0201, including:

• Defective fuel injector
• Faulty or corroded wiring and connections
• Plugged fuel injector
• Dirt or debris in the fuel injector

Audi DTC P0201 seriousness

DTC P0201 is considered a serious issue as it can lead to significant engine performance problems. If left unaddressed, it may result in:

• Increased fuel consumption
• Engine damage due to misfires
• Higher emissions, potentially failing emissions tests
• Overall reduced vehicle reliability

How to diagnose DTC P0201 on Audi

To diagnose DTC P0201, follow these steps:

1. Use an OBD-II scanner to confirm the DTC and check for any additional codes.
2. Inspect the wiring and connectors for the fuel injector for signs of damage or corrosion.
3. Test the fuel injector’s resistance using a multimeter to ensure it is within specifications.
4. Check the fuel supply to the injector for proper pressure and flow.
5. Perform a visual inspection of the fuel injector for clogs or dirt.

How to fix DTC P0201 on Audi step-by-step instructions

To fix DTC P0201, follow these step-by-step instructions:

1. Disconnect the battery to ensure safety while working on the vehicle.
2. Inspect and repair any damaged wiring or corroded connections related to the fuel injector.
3. If the fuel injector is defective, replace it with a new one.
4. Clean the fuel injector if it is clogged or dirty using an appropriate fuel injector cleaner.
5. Reconnect the battery and clear the DTC using an OBD-II scanner.
6. Start the engine and monitor for any reoccurrence of the DTC.

How to erase DTC P0201 on Audi

To erase DTC P0201, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the codes.
5. Disconnect the scanner and start the engine to ensure the code does not return.

Recommended tools for Audi diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.