P0102 – Audi DTC

Audi DTC P0102 – The Mass Airflow Sensor (MAF) Sensor is unplugged or the wiring is damaged, Loose or corroded electrical terminals in the MAF Sensor circuit, Faulty MAF Sensor

DTC P0102 meaning on Audi

DTC P0102 indicates a problem with the Mass Airflow Sensor (MAF) in an Audi vehicle. This code is triggered when the Engine Control Module (ECM) detects a low voltage signal from the MAF sensor, which may suggest that the sensor is unplugged, damaged, or has faulty wiring. The MAF sensor is crucial for measuring the amount of air entering the engine, which is essential for optimal fuel injection and engine performance.

Audi DTC P0102 symptoms

Common symptoms associated with DTC P0102 may include:

• Check Engine Light illuminated
• Reduced engine performance
• Rough idling or stalling
• Poor fuel economy
• Difficulty starting the engine

Audi DTC P0102 causes

The causes of DTC P0102 can include:

• Unplugged MAF sensor
• Damaged wiring or connectors in the MAF sensor circuit
• Loose or corroded electrical terminals
• Faulty MAF sensor
• Vacuum leaks in the intake system

Audi DTC P0102 seriousness

DTC P0102 is considered a serious issue as it can lead to poor engine performance and increased emissions. If left unaddressed, it may result in further engine damage or failure. It is important to diagnose and repair the issue promptly to ensure the vehicle operates efficiently and to prevent potential long-term damage.

How to diagnose DTC P0102 on Audi

To diagnose DTC P0102, follow these steps:

1. Use an OBD-II scanner to confirm the DTC and check for any additional codes.
2. Inspect the MAF sensor wiring and connectors for damage, corrosion, or loose connections.
3. Check the MAF sensor itself for proper operation using a multimeter or scan tool.
4. Inspect the intake system for vacuum leaks that may affect airflow readings.
5. Clear the DTC and take the vehicle for a test drive to see if the code returns.

How to fix DTC P0102 on Audi step-by-step instructions

To fix DTC P0102, follow these steps:

1. Disconnect the battery to ensure safety while working on the electrical system.
2. Inspect and repair any damaged wiring or connectors in the MAF sensor circuit.
3. If the MAF sensor is faulty, replace it with a new one.
4. Reconnect all electrical connections securely.
5. Reconnect the battery and clear the DTC using an OBD-II scanner.
6. Perform a test drive to verify that the issue is resolved and the DTC does not return.

How to erase DTC P0102 on Audi

To erase DTC P0102, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the DTC menu on the scanner and select the option to clear or erase codes.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and start the engine to ensure the DTC does not reappear.

Recommended tools for Audi diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.