P0014 – Audi DTC

Audi DTC P0014 – Camshaft variable timing solenoid failure, Engine oil level is too low, The engine is not timed correctly, The engine oil does not meet the manufacturer’s requirements, Variable valve timing actuator failure, Worn timing chain

DTC P0014 meaning on Audi

DTC P0014 indicates a problem with the camshaft variable timing system in Audi vehicles. This code specifically refers to the camshaft timing being over-advanced or out of the expected range. The variable valve timing (VVT) system is crucial for optimizing engine performance, fuel efficiency, and emissions control.

Audi DTC P0014 symptoms

Common symptoms associated with DTC P0014 may include:

• Check Engine Light illuminated
• Rough idling or stalling
• Decreased engine performance
• Poor fuel economy
• Unusual engine noises

Audi DTC P0014 causes

Several factors can lead to the occurrence of DTC P0014, including:

• Camshaft variable timing solenoid failure
• Engine oil level is too low
• Engine oil does not meet the manufacturer’s requirements
• Engine is not timed correctly
• Variable valve timing actuator failure
• Worn timing chain

Audi DTC P0014 seriousness

DTC P0014 can be serious as it affects engine performance and efficiency. If left unaddressed, it may lead to:

• Increased emissions
• Potential engine damage
• Reduced fuel economy
• Failure to pass emissions tests

How to diagnose DTC P0014 on Audi

To diagnose DTC P0014, follow these steps:

1. Use an OBD-II scanner to confirm the DTC and check for any related codes.
2. Inspect the engine oil level and quality.
3. Examine the camshaft variable timing solenoid and actuator for proper operation.
4. Check the timing chain for wear or damage.
5. Verify that the engine timing is set correctly.

How to fix DTC P0014 on Audi step-by-step instructions

To fix DTC P0014, follow these steps:

1. Check and top off the engine oil if it is low.
2. Change the engine oil if it does not meet manufacturer specifications.
3. Inspect and replace the camshaft variable timing solenoid if faulty.
4. Examine the variable valve timing actuator and replace if necessary.
5. Check the timing chain for wear and replace if needed.
6. Ensure the engine timing is correctly set according to specifications.

How to erase DTC P0014 on Audi

To erase DTC P0014, follow these steps:

1. Use an OBD-II scanner to clear the trouble codes.
2. Start the engine and allow it to reach operating temperature.
3. Perform a test drive to ensure the code does not return.

Recommended tools for Audi diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.